409-10083
AMP 3K and AMP 5K Terminating Machines with the SL Starlite CQM
Rev E
30 of 38
Tyco Electronics Corporation
Figure 20
3. Using a screwdriver, begin prying the retaining clip out of the light assembly. See Figure 20.
4. Finish removing the retaining clip from the light assembly and remove the light assembly from the
“goose neck.” Refer to Figure 21.
Figure 21
5. Thread the “goose neck” through the hole in the cover. Refer to Figure 22.
6. Install the light assembly to the end of the “goose neck.”
