409-10083
AMP 3K and AMP 5K Terminating Machines with the SL Starlite CQM
Rev E
24 of 38
Tyco Electronics Corporation
Figure 14
Adjustment Lever Reading
(+" above 0.00 mm
[.000 in.] setting)
Read Full Step
.051mm
[.002 in.]
+
2
Read Half Step
0.064 mm
[.0025 in.]
Read Full Step
0.051 mm
[.002 in.]
3
-
-
Adjustment Lever Reading
(-" below .00 mm
[.000 in.] setting)
2
Manual Precision
Adjustment Lever
Read Full Step
0.051 mm
[.002 in.]
+
2
Read Half Step
0.064 mm
[.0025 in.]
2
+
7.4. Guard Insert Adjustment
A guard insert is supplied with the machine. Some applications may require a special insert. See Figure 15 for
available guard inserts.
The guard contains two slots into which the inserts can be placed: the rear slot places the insert close to the
applicator; the front slot places the insert farther away from the applicator. The type of insert used determines
which slot is to be used. An insert placed into the wrong slot cannot be secured in place.
Some special inserts are designed to mount in the standard insert slot. These inserts have the threaded holes at the
top corners and should be installed according to the instructions for the standard insert.
NOTE
i