Exit
To exit these adjustments press the + button when 'Exit...' is displayed.
Manual Set...
This function sh ould only be n eeded when the AutoSet has failed for some reason, or the
Computer image that you ar e using has a dark background which Auto Set cannot see.
Please read the notes on AutoSet & Level adjustments in the Infra-red Remote C ontrol
section before adjusting these parameters, in case something else will solve the problem.
With these adjustments you can manually set whichever area of the computer's image is
to be used for display on your TV.
It is highly recommended that this mode is only used when in Underscan mode, or you
will not know if you've adjusted the values correctly. Th e 'VGA Store' option can be used
to save your new settings in the unit's memory.
Follow the method listed below, pressing MENU between each step, to optimize your
display:-
VGA Left
Adjust this value using the - button until you notice that some of the image is lost,
and then press + to come back one step.
VGA Width
Do the same for the right hand image, but this time pr until the image
just starts to be lost, and then press - once.
VGA Top
Press the + button until the top edge of image is lost, or becomes discolored then
press - once.
VGA Bot (bottom)
Press the - button until the bottom edge of image is lost, then press + once.
If you wish to go back and chan ge any of the above adjustments press the MENU button
until the desired adjustment is being displayed then + or - to alter its setting.
VGA Store
Press + once t o store your new settings. They will now be remembered in the Eclipse's
memory even after the power is switched off.
Exit
To exit these adjustments press the + button at this prompt, this will return you to the
main menu structure.
Advanced...
These options are described in the next section.
25
B
o
th
v
e
rs
io
n
s
