Important Information
Read both sides of this sheet
This card is compatible with the following computers:
• Power Macintosh Series 7300, 7500, 7600, 8500, 8515, 8600, 9500, 9500/180MP, 9515, 9600,
9600/200MP
• Workgroup Server 7350, 8550, 9650
• Daystar Genesis and Millennium Series
• Mactell XB-Pro
• Power Computer PowerTower Pro, PowerWave
• UMAX J700, S900
If your computer is not listed here, it is not compatible with this card
; contact your reseller to
exchange it for a compatible upgrade.
Please install software from the included Sonnet Installer CD
You should install software from the included Sonnet Installer CD BEFORE you install this proces-
sor card. Please note that
your system must be booted in Mac OS 8.x or Mac OS 9.x in order to run the
Please note that
Please note that
Crescendo/Encore installer
.
Crescendo/Encore installer
Crescendo/Encore installer
Follow the steps below:
1.
If your system is booted in Mac OS X, switch back to OS 9.2; otherwise, skip to the next step
.
If your system is booted in Mac OS X, switch back to OS 9.2; otherwise, skip to the next step
If your system is booted in Mac OS X, switch back to OS 9.2; otherwise, skip to the next step
From the Apple menu, select System Preferences…, and then click on the Startup Disk
icon. When the System Folders appear, select the Mac OS 9.2 System Folder in which you
will install the Sonnet software.
2.
Insert the Sonnet Installer CD into the CD-ROM drive. Double-click the
Mac OS 7-9 ONLY,
not Classic
folder, and then double-click the Crescendo/Encore Install icon. By default,
with “Easy Install” selected from the pop-up menu, the required software will be installed
into the active System Folder on the boot drive. If this is okay, click the Install button;
otherwise, select “Custom Install” from the pop-up menu for more options or to select
another drive to install the software. The installer will install the appropriate software into
your computer’s System Folder.
3.
If the installation was successful, a dialog box will appear informing you it is okay to shut
down your computer. If an error occurred, an error message will appear; you must rerun
the installer.
4.
After your system shuts down, locate the appropriate hardware installation chapter in the
included manual and follow the steps to install the upgrade.
- OVER -
AD-PPC-G4-1000-A-030906
