Front-Panel Control (CS-450 ext. version)
Control methods
There are 3 ways to control the CS-450 Eclipse:
1. By the buttons on the front panel
2. By the infra-red remote control unit
3. Directly from the computer via the serial (RS232) port
This section will describe what you can do with the 'quick-set' buttons on the front,
which ar e detailed at the bottom of the front-panel. The text at t he top of the panel refers
to use when the on-screen display (OSD) menu is enabled when the MENU button is
pressed - and this, along with the infra-red and serial port control, is described later. The
text at the bottom of the panel refers to the 'quick-set' buttons detailed here.
Shown below is a diagram that indicates the main features of the front panel.
M
E
N
U
O
/S
C
A
N
-
F
R
E
E
Z
E
+
M
O
D
E
F
A
D
E
Infra-red receiver
Front of CS-450 Eclipse showing panel buttons
Illuminated buttons
These indicate the current state of the unit, and are also used to change the unit's state.
MENU.
This is used to initiate front panel control of the unit via the on-screen
display (OSD), and to select the various options and features to change, and is
described in a later section. It illuminates green when power is on, and flashes if
a button or infra-red lock is active.
O/SCAN -
. This enables and disables overscan mode - see the next section for
more details on what 'overscan' is. The button is illuminated when overscan is
selected.
4
E
xt
e
rn
a
l
ve
rs
io
n
