On-Screen Display
(This feature is only usable on the CS-460 intern al PCI/ISA version if the Infra-Red
Receiver Module is being used in combination with a remote control.)
Introduction
As well as being controlled via the Infra-Red hand controller, the Eclipse can be
controlled further using an On Screen Display menu (OSD).
The external unit's OSD can be activated and controlled by using the front pa nel buttons
marked MENU, + and -.
For the intern al PCI/ISA unit, the 3 buttons on the remote control detailed in the
'Infra-Red Remote Control' section in this manual do the same thing.
SIZE
POS
FILTER
L.CLICK
D.CLICK R.CLICK
MOUSE
PAN
New function for these buttons, when used with
MENU
+
-
the Eclipse PCI/ISA internal card
I.e. L.CLICK becomes MENU, D.CLICK becomes -, and R.CLICK b.
Activating & Navigating the On-Screen Dis play (OSD)
Pressing the MENU button will activate the On Screen Display (OSD) function,
presenting you at the start of the Menu Structure. The top li ne of the OSD is th e menu
name you are currently in, while the lower line will indicate what sub-menu is available,
or the feature that can be altered.
Once in menu mode the buttons - and + can be used for adjusting the various settings
that will be displayed. Sub-menus (indicated by ' ...' trailin g the sub-menu text on the
lower OSD line) can be entered by pr.
You can 'navigate' to the next feature in the menu list by pressing the MENU button
again. At the end of every menu or sub-men u l ist, will be an 'Exit... ' option, and + will
then exit back to the previous menu, or terminate the OSD.
In any case, the OSD will terminate after approximately 25 seconds of inactivity.
Flicker Red.
Performs the same function as mentioned with the infra-r ed remote control FILTER
button (flicker r eduction), where you can set the flicker r eduction to either 2 line or 4 lin e
use.
21
B
o
th
v
e
rs
io
n
s
