turck TN-UHF AUS-CDS Series, Instructions For Use Manual

Page: 192 / 225

Setting
RFID channels – overview of the commands
192
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
8.5.21 Command: Reset
The Reset command resets the read/write head and interface.
Request
Loop counter See description of the output data, [ } 156]
Command code 0x8000 (hex.), 32768 (dec.)
Read/write head address See description of the output data, [ } 156]
Length UID/EPC Not required
Start address 0: Software reset
1: Voltage reset
Length Not required
Command timeout See description of the output data, [ } 156]
Write fragment no. 0
Read fragment no. See description of the output data, [ } 156]
Write data Not required
Response
Loop counter See description of the input data, [
}
152]
Response code 0x8000 (hex.), 32768 (dec.)
Length Not required
Error code See description of the input data, [
}
152]
Tag within the
detection range See description of the input data, [ } 152]
Data (bytes) available See description of the input data, [ } 152]
Tag counter See description of the input data, [ } 152]
Write fragment no. 0
Read fragment no. See description of the input data, [ } 152]
Read data Not required