turck TN-UHF AUS-CDS Series, Instructions For Use Manual

Page: 176 / 225

Setting
RFID channels – overview of the commands
176
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
8.5.11 Direct read/write head command
NOTE
The command code for fast processing with the loop counter is 0x2060 (hex.) or
8288 (dec.).
A direct command enables commands from the read/write head protocol to be sent directly to
the read/write head. The commands are defined and interpreted by the entries in the write and
data.
NOTE
The read/write head protocol is not part of this documentation and must be reques-
ted from Turck and specially released. Send any inquiries about the read/write head
protocol to Turck.
Request
Loop counter See description of the output data, [ } 156]
Command code 0x0060 (hex.), 96 (dec.)
Read/write head address See description of the output data, [
}
156]
Length of EPC 0
Start address Not required
Length Length of the description of the direct command in the
write data, entry in bytes
Command timeout See description of the output data, [ } 156]
Write fragment no. 0
Read fragment no. See description of the output data, [ } 156]
Write data Description of the direct command
Response
Loop counter See description of the input data, [ } 152]
Response code 0x0060 (hex.), 96 (dec.)
Length Length of the description of the direct command in the
write data
Error code See description of the input data, [ } 152]
Tag within the
detection range See description of the input data, [ } 152]
Data (bytes) available See description of the input data, [
}
152]
Tag counter See description of the input data, [ } 152]
Write fragment no. 0
Read fragment no. See description of the input data, [
}
152]
Read data Response to the direct command