Appendix: Flow charts showing the operation of the device
Flow chart: Continuous mode with interruption before reading data
222
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | [email protected] | www.turck.com
15.4
Flow chart: Continuous mode with interruption before reading data
Set command:
Command Code = 0x0012
„Continous mode active“ = False
Data bytes available = 0
ERROR= TRUE
Error Code
OR
Read-Fr1
Yes
No
Done
Idle:
Command Code = 0
Response Code = 0
Response Code = Command Code
Set parameter:
„Length“ := data (bytes) available
Set command:
Command Code := 0x0011
Set command:
Command Code = 0x0010
Set output parameter:
- „Start address“ = 1
(Grouping EPCs for UHF)
- e.g. timeout
Yes
Manual stop
Automatic stop
after timeout
Fig. 163: Flow chart for Continuous mode with interruption before reading data
Summary of Contents for TN-UHF AUS-CDS Series
Page 1: ...Your Global Automation Partner Instructions for Use TN UHF CDS UHF Read Write Head ...
Page 2: ...2 Hans Turck GmbH Co KG T 49 208 4952 0 F 49 208 4952 264 more turck com www turck com ...
Page 97: ...V02 00 2020 08 97 Transfer the mapping to the POU Fig 94 Transferring the mapping to the POU ...
