turck TN-UHF AUS-CDS Series, Instructions For Use Manual

Page: 174 / 225

Setting
RFID channels – overview of the commands
174
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
8.5.9 Command: End Continuous (presence sensing) mode
Continuous and presence sensing mode can be stopped via the Shut down Continuous (pres-
ence sensing) mode command. The data in the buffer of the interface is not deleted after the
command is executed and can still be called up by the controller via the Get data from buffer
command.
Request
Loop counter See description of the output data, [ } 156]
Command code 0x0012 (hex.), 18 (dec.)
Read/write head address Not required
Length of EPC Not required
Start address Not required
Length Not required
Command timeout See description of the output data, [ } 156]
Write fragment no. 0
Read fragment no. See description of the output data, [ } 156]
Write data Not required
Response
Loop counter See description of the input data, [
}
152]
Response code 0x0012 (hex.), 18 (dec.)
Length Not required
Error code See description of the input data, [
}
152]
Tag within the
detection range See description of the input data, [ } 152]
Data (bytes) available See description of the input data, [ } 152]
Tag counter See description of the input data, [ } 152]
Write fragment no. 0
Read fragment no. See description of the input data, [ } 152]
Read data Not required