66
Lifeline 4000 Advanced User Guide (B)
Copyright © 2000 Tunstall Group Ltd.
Ringing
Ringing can be disabled using parameter
94. For example, a resident might have
an ordinary telephone connected to the
same line as their Lifeline 4000 and might prefer only to hear their ordinary telephone ring when
someone calls.
Parameter 94 can also be used to enable and disable augmented ringing. Augmented ringing
is explained below, where parameter 169 can be used to determine when augmented ringing
starts.
The first digit for parameter 94 determines whether ringing is enabled or disabled (0 = enabled,
and 1 = disabled). The second digit in parameter 94 sets whether augmented ringing is enabled or
disabled. If ringing is disabled then the setting for augmented ringing will be irrelevant, as no
ringing of any sort will be heard.
Example
To enable ringing and disable augmented ringing
1.
Enter local programming mode by holding down the
key and then holding down the
# key until the unit beeps. Release the # key first, and then the
key.
2.
Enter the parameter—press
9 4
.
3.
Delete the old value using the C key (display version only).
4.
Enter 0 1 and then press
.
5.
End local programming by pressing the
Cancel
key.
Augmented ringing interval
Lifeline 4000 can be made to increase the volume of its ringing the longer an incoming call goes
unanswered. The number of rings that Lifeline allows before it increases its volume is set in
parameter 169. If a value of 00 is entered then Lifeline will never increase the volume of the
ringing. If a value of 03 is entered then Lifeline will increase the volume of the ringing after just
three rings.
Note that the value entered into this parameter will have no effect if augmented ringing is
turned off using parameter 94. Likewise, it will have no effect if incoming ringing is turned off
using parameter 94 (above).
Example
To set the Lifeline 4000 to augment ringing after five rings
1.
Enter local programming mode by holding down the
key and then holding down the
# key until the unit beeps. Release the # key first, and then the
key.
2.
Enter the parameter—press
1 6 9
.
3.
Delete the old value using the C key (display version only).
4.
Enter 0 5 and then press
.
5.
End local programming by pressing the
Cancel
key.
g
n
i
g
n
i
r
e
l
b
a
s
i
D
g
n
i
g
n
i
r
d
e
t
n
e
m
g
u
a
e
l
b
a
s
i
D
0
0
Summary of Contents for Lifeline 4000
