Tunstall Lifeline 4000, User Manual

Page: 28 / 80

28
Lifeline 4000 Advanced User Guide (B) Copyright © 2000 Tunstall Group Ltd.
Examples
Setting the first user key to be the Away key
1. Enter local programming mode by holding down the key and then holding down the
# key until the unit beeps. Release the # key first, and then the
key.
2. Enter the parameter—press 1 2 0 .
3. Delete the old value using the C key (display version only).
4. Enter 0 0 0 0 0 1 and then press .
5. End local programming by pressing the Cancel key.
Setting the second user key to be a Fast Dial key
1. Enter local programming mode by holding down the key and then holding down the
# key until the unit beeps. Release the # key first, and then the
key.
2. Enter the parameter—press 1 2 1 .
3. Delete the old value using the C key (display version only).
4. Enter 0 0 0 0 0 5 and then press .
5. End local programming by pressing the Cancel key.
Setting the
C
key to be the Speech Record key
1. Enter local programming mode by holding down the key and then holding down the
# key until the unit beeps. Release the # key first, and then the
key.
2. Enter the parameter—press 1 4 3 .
3. Delete the old value using the C key (display version only).
4. Enter 0 0 0 0 0 2 and then press .
5. End local programming by pressing the Cancel key.
Setting the fifth user key to toggle the external output (to lock and unlock a door)
1. Enter local programming mode by holding down the key and then holding down the
# key until the unit beeps. Release the # key first, and then the
key.
2. Enter the parameter—press 1 2 4 .
3. Delete the old value using the C key (display version only).
4. Enter 0 3 0 0 0 4 and then press .
5. End local programming by pressing the Cancel key.