Copyright © 2000 Tunstall Group Ltd.
Lifeline 4000 Advanced User Guide (B)
51
Set call sequence 3 to call personal recipients first and then the control centres
1.
Enter local programming mode by holding down the
key and then holding down the #
key until the unit beeps. Release the # key first.
2.
Enter the parameter—press
1 0 4
.
3.
Delete the old value using the C key.
4.
Enter 5 1 3 1 6 1 4 1 7 1 , and then press
.
5.
Enter the next parameter—press
1 0 5
.
6.
Delete the old value using the C key.
7.
Enter 1 3 2 3
0
0
0 , and then press
.
8.
End local programming by pressing the
Cancel
key.
For some residents their first port of call might be a personal recipient. You might wish to set any
personal radio triggers to use a call sequence that contacted the control centres first. However,
you might also want a call sequence for the integral button that contacts personal recipients first.
This is an example of how such a list might be entered. The control centre numbers are entered
last, with the last three spaces in the call sequence unused.
Summary of Contents for Lifeline 4000
