Tunstall Lifeline 4000, User Manual

Page: 30 / 80

30
Lifeline 4000 Advanced User Guide (B) Copyright © 2000 Tunstall Group Ltd.
Messages and warnings
User Options
The User Options parameter allows you to set the warnings for telephone line disconnection as
well as mains (power) failure. For historical reasons, this is also the parameter that determines
whether Inactivity Monitoring is turned on or off. As explained earlier in this guide, this allows
Lifeline 4000 to remain compatible with older control centres.
The User Options parameter number is 11. To set this parameter you need to enter a 2-digit
number. Follow the tree below from top to bottom to discover the value you need to enter.
Telephone Line Disconnect Warning. This determines whether Lifeline announces when it is not
connected to the telephone line. If this feature is turned on then Lifeline will make these
announcements are regular intervals. The default setting is on.
Inactivity Monitoring. This determines whether Lifeline monitors inactivity. For more information
see the section on Inactivity Monitoring in Chapter 2. The default setting is off.
Disable audio on telephone line disconnect. This determines whether Lifeline provides an audible
warning when the telephone line is disconnected. If this feature is turned on it disables the audible
warning—it is very easy to get this the wrong way around and assume that setting this feature to
true enables the audible warning, when the reverse is true.
Mains Fail Warning.
When there is a power cut Lifeline will make announcements at regular
intervals. However, in regions where power cuts in the middle of the night are common, many
residents prefer this feature to be turned off. The default setting is on.
Start Here
Inactivity Monitoring
Telephone line
disconnect warning
Disable audio on
telephone line disconnect
Mains fail warning
Value to enter 65 64 61 60 45 44 41 40 25 24 21 20 05 04 01 00