Tunstall Lifeline 4000, User Manual

Page: 12 / 80

12
Lifeline 4000 Advanced User Guide (B) Copyright © 2000 Tunstall Group Ltd.
Setting the clock
Lifeline 4000 has a 24-hour clock. In other words,
9.30am is displayed as 09:30. 10.15pm is displayed as
22:15. To set the time you need to enter programming
mode, select parameter 171, and then enter the time as
a four-digit number.
Examples
Setting the time to 9.35am
1. Enter local programming mode by holding down the key and then holding down the
# key until the unit beeps. Release the # key first, and then the
key.
2. Enter the parameter—press 1 7 1 .
3. Delete the old value using the C key (display version only).
4. Enter the new value 0 9 3 5 and then press .
5. End local programming by pressing the Cancel key.
Setting the time to 1pm
1. Enter local programming mode by holding down the key and then holding down the
# key until the unit beeps. Release the # key first, and then the
key.
2. Enter the parameter—press 1 7 1 .
3. Delete the old value using the C key (display version only).
4. Enter the new value 1 3 0 0 and then press .
5. End local programming by pressing the Cancel key.
Setting the time to 10.48pm
1. Enter local programming mode by holding down the key and then holding down the
# key until the unit beeps. Release the # key first, and then the
key.
2. Enter the parameter—press 1 7 1 .
3. Delete the old value using the C key (display version only).
4. Enter the new value 2 2 4 8 and then press .
5. End local programming by pressing the Cancel key.