4 The outline of motor control
22
04TYPE Hand box controller (PM16-HDX 4 axis control)
You can select one channel from A, B, C, D that are displayed on LCD, and you can
control it.
1.
Channel select switch
Select one channel from A, B, C, D that are
displayed on LCD.
2.
Speed change switch
In local mode, you can change the speed of the
specified channel from HSPD, MSPD and
LSPD.
In remote mode, it becomes the STOP button.
(see below)
3.
JOG switch
When you press once, it gives the instruction
once in the direction (CW or CCW) in which you move the JOG switch.
It is same function of the JOG switch of PM16C-16HW2 front panel.
02TYPE Hand box controller (PM16-HDX 2 axis simultaneous control)
Simultaneous control of channels A and B, which is displayed on the display is possible.
1.
Speed change switch
In local mode, you can change the speed of the
channel A, B from HSPD, MSPD and LSPD.
In remote mode, it becomes the STOP button.
(see below)
2.
CH A JOG switch
It is the same function as the JOG switch of the
front panel of PM16C-16, and it operates the
channel A which is displayed on LCD display.
When you press once, it gives the instruction
once in the direction (CW or CCW) in which
you move the JOG switch.
If press and hold, it continues to operate.
3.
CH B JOG switch
It is the same function as the JOG switch of the front panel of PM16C-16HW2, and
it operates the channel B which is displayed on LCD display.
When you press once, it gives the instruction once in the direction (CW or CCW) in
which you move the JOG switch. If press and hold, it continues to operate.
1
3
3
1
2
3
