TruVision Series 7 IP Camera Configuration Manual
109
4. Click the icon
to save the current PTZ view as the preset.
The preset name turns from gray to black.
To call up a preset:
1. Click the icon
to select the preset configuration interface.
2. Select a desired preset number from the list.
3. Click the icon
to call the selected preset.
The selected PTZ View will move to the pre-defined preset scene.
To delete a preset:
1. Select a desired preset number from the list.
2. Click the icon
to delete the selected preset.
The preset name turns from black to gray.
To set a preset tour:
Note: At least two presets are required to set a preset tour.
1. Click the icon
to enter the tour configuration interface.
2. Select a preset tour path number from the drop-down list and click the icon
to
configure the path.
3. Click
to add a preset into the path and click
to delete a preset.
4. Set the preset number, speed and lingering time at each preset. You can adjust the
order of preset by using
and
.
5. Click
OK
to save preset tour path.
Note
: Up to 32 preset tour paths can be set. Each path can support up to 16 steps.
