TruVision Series 7 IP Camera Configuration Manual
83
5. Click on the live video to specify the four vertexes of the detection region and
release the mouse to complete drawing.
6. Set the Max. Size and Min. Size for valid targets. Targets that are smaller or larger
than the valid target size cannot trigger detection.
Max. Size
: The maximum size of a valid target. Targets with larger sizes would not
trigger detection.
Min. Size
: The minimum size of a valid target. Targets with smaller sizes would not
trigger detection.
7. Click
Stop Drawing
when finished drawing.
8. Drag the slider to set the sensitivity value.
Sensitivity
: Range [1-100]. Sensitivity stands for the percentage of the body/object
part of an acceptable target that enters the pre-defined region.
Sensitivity = 100 – S1/ST*100
S1 stands for the target body part that enters the pre-defined region ST stands for
the complete target body.
Example: if you set the value as 60, the action can be counted as a region exiting
action only when 40 percent body part leaves the region.
9. Repeat the above steps to configure other regions. Up to four regions can be set.
You can click the
Clear
button to clear all pre-defined regions.
10.
Click
Arming Schedule
to set the arming schedule.
11.
Click
Actions
to select the linkage methods.
12. Click
Save
to save the settings.
Unattended baggage detection
This function detects the objects left behind in the pre-defined region such as a
suitcase, purse, dangerous materials, etc. It can be set up to trigger a series of alarm
actions. Please note that this feature is not able to properly detect unattended objects in
complex and low contrast environments.
To set up unattended baggage detection:
1. Click
Configuration
>
Event
>
Smart
Event
>
Unattended Baggage Detection
.
