TruVision Series 7 IP Camera Configuration Manual
89
interfaces. For detailed information, please refer to the section on alarm inputs
on page 68.
•
Motion & Alarm:
Video will be recorded when the Motion and Alarm are
triggered at the same time. Besides configuring the recording schedule, you
must also configure the settings on the
Motion Detection
and
Alarm Input
Settings
interfaces. For detailed information, please refer to the section on alarm
inputs on page 68.
•
VCA Alarm:
Video will be recorded when a VCA event is triggered. Besides
configuring the recording schedule, you must configure the settings of the
selected VCA event type: Audio Exception Detection, Defocus Detection, Scene
Change Detection, Face Detection, Intrusion Detection, Cross Line Detection,
Region Entrance Detection, Region Exit Detection, Unattended Baggage
Detection, Object Removal Detection.
Note
: Up to eight record types can be selected.
5. Set the recording periods for the other days of the week if required.
Click
Copy
to copy the recording periods to another day of the week.
6. Click
OK
and
Save
to save changes.
Note:
If you set the record type to “Motion detection” or “Alarm”, you must define the
arming schedule in order to trigger motion detection or alarm input recording.
Scheduled snapshots
You can configure scheduled snapshots and event-triggered snapshots. The captured
snapshots can be stored on the SD card (if installed) or the NAS
.
You can also upload
the snapshots to an FTP server.
You can set up the format, resolution and quality of the snapshots. The quality can be
low, medium, or high.
You must enable the option
Enable Timing Snapshot
if you want snapshots to be
uploaded with a fixed interval to the FTP server. If you have configured the FTP
settings and enabled
Upload Type
in the
Network
>
Advanced Settings
>
FTP
tab,
the snapshots will not be uploaded to the FTP if the
Enable Timing Snapshot
option is
disabled.
You must enable the option
Enable Event-Triggered Snapshot
if you want snapshots
to be uploaded to the FTP and NAS when motion detection or an alarm input is
triggered. If you have configured the FTP settings and selected
Upload Type
in the
Network
>
Advanced Settings
>
FTP
tab for motion detection or an alarm input, the
snapshots will not be uploaded to the FTP if this option is disabled.
To set up continuous and event-triggered snapshots:
1. From the menu toolbar, click
Configuration
>
Storage
>
Schedule Settings >
Snapshot > Capture Schedule
.
Note
:
Continuous
is the only recording type available.
