Snow Flurry 1400
40
Lower handle
1.
Disconnect the power supply of the snow thrower.
2.
Remove the two wing nuts and carriage bolts that
hold the middle handle to the lower handle.
3.
Gently spread the middle handle section while slid-
ing it off of the snow thrower.
4.
Remove the nuts and bolts that hold the lower han-
dle to the left side panels using a pair of 10mm
wrenches. See Figure 4.31.
5.
Remove the nuts and bolts that hold the lower han-
dle to the right side panels using a pair of 10mm
wrenches.
6.
Remove the two carriage bolts and nuts that hold
the lower handle bar to the bottom of the auger
housing using a 10mm wrench. See Figure 4.32.
7.
Slide the lower handle off of the snow thrower.
8.
Install the lower handle by following the previous
steps in reverse order.
9.
Test run the snow thrower before returning it to ser-
vice.
Figure 4.30
Wing nuts
Figure 4.31
Handle bolts
Figure 4.32
Carriage bolts
For Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com
Summary of Contents for Flurry 1400
