![background image](http://html.mh-extra.com/html/troy-bilt/flurry-1400/flurry-1400_professional-shop-manual_1173270036.webp)
Snow Flurry 1400
32
8.
Gently bow out the right side of the auger housing.
9.
Slide the auger far enough to the left to allow the
right side of the auger to clear the housing.
See Figure 4.9.
10.
Remove the auger.
NOTE:
These snow throwers have an auger that is
assembled.
11.
Mark the auger end mounts to identify which one is
the left and which one is the right.
12.
Remove the nuts and bolts that hold the rubber spi-
rals to the auger assembly using a #3 phillips screw
driver and a 10mm wrench. See Figure 4.10.
13.
Slide the left bearing and bearing cup off of the
auger shaft. See Figure 4.11.
14.
Slide the auger end mount off of the auger shaft.
15.
Remove the key.
16.
Remove the snap ring using a pair of retaining ring
pliers.
Figure 4.9
Figure 4.10
Mark the auger end mounts
Figure 4.11
End mount
Bearing cup
Washer
Bearing
For Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com
Summary of Contents for Flurry 1400
