![background image](http://html.mh-extra.com/html/troy-bilt/flurry-1400/flurry-1400_professional-shop-manual_1173270035.webp)
Auger Housing Components
31
To remove/replace the upper discharge chute:
1.
Disconnect the power supply of the snow thrower.
2.
Remove the lock nut and carriage bolt that attach the
upper chute to the lower chute using a 10mm
wrench. See Figure 4.6.
3.
Remove the wing nut and carriage bolt that attaches
the upper chute to the lower chute.
4.
Install the upper chute by following the previous steps
in reverse order.
5.
Test run the snow thrower before returning it to ser-
vice.
Auger
To remove/replace the auger:
1.
Disconnect the power supply of the snow thrower.
2.
Remove the lower belt by following the procedures
described in Chapter 3: Belt and Pulleys.
3.
Remove the auger pulley by following the procedures
described in Chapter 3: Belt and Pulleys.
4.
Remove both bearing retainers by removing the
bearing retainer screws using a 7mm wrench.
See Figure 4.7.
5.
Remove the two screws that hold the right side panel
to the auger housing using a #2 phillips screw driver.
6.
Remove the two nuts and bolts that attach the lower
handle to the side panel using a pair of 10mm
wrenches.
7.
Rotate the right side panel away from the auger
housing.
Figure 4.6
Wing nut
Carriage bolt
Figure 4.7
Screws
Figure 4.8
Side panel
For Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com
Summary of Contents for Flurry 1400
