![background image](http://html.mh-extra.com/html/troy-bilt/flurry-1400/flurry-1400_professional-shop-manual_1173270038.webp)
Snow Flurry 1400
34
Left side panel
To remove/replace the left side panel:
1.
Disconnect the power supply of the snow thrower.
2.
Remove the upper and lower belt by following the
procedures described in Chapter 3: Belt and Pul-
leys.
3.
Remove the auger pulley by following the proce-
dures described in Chapter 3: Belt and Pulleys.
4.
Remove the reduction pulley using a 12mm wrench
and a 13mm wrench.
NOTE:
There is a shoulder spacer and a washer
under the reduction pulley. See Figure 4.13.
5.
Remove the motor by following the procedures
described in Chapter 2: Electrical.
6.
Remove the three bearing retainer screws using a
7mm wrench. See Figure 4.14.
7.
Remove the screw that holds the roller axle to the
side panel using a 10mm wrench.
NOTE:
A pair of locking pliers can be used to hold
the axle while removing the screw.
See Figure 4.15.
Figure 4.13
Shoulder spacer
NOTE: the washer is
already removed
Figure 4.14
Bearing retainer
screws
Figure 4.15
Locking pliers
Screw
For Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com
Summary of Contents for Flurry 1400
