![background image](http://html.mh-extra.com/html/troy-bilt/flurry-1400/flurry-1400_professional-shop-manual_1173270039.webp)
Auger Housing Components
35
8.
Remove both of the nuts and bolts that hold the lower
handle to the side panel using a pair of 10mm
wrenches. See Figure 4.16.
NOTE:
There are washers under the bolt head and under
the nuts.
9.
Remove the two screws that hold the side panel to
the auger housing using a #2 phillips screw driver.
See Figure 4.17.
10.
Slide the side panel out from in between the lower
handle and the auger housing.
11.
Remove the nut and bolt that holds the spacer and
motor mounting plate to the side panel using a pair of
10mm wrenches. See Figure 4.18.
12.
Remove the shoulder bolt, spring and the idler pulley
using a 16mm wrench and a 10mm wrench.
13.
Remove the idler bracket using a 10mm wrench and
a 22mm wrench.
14.
Install the left side panel by following the previous
steps in reverse order.
15.
Test run the snow thrower in a safe area before
returning it to service.
Figure 4.16
Lower handle
Figure 4.17
Screws
Figure 4.18
Motor mounting plate
Spacer
Nut
Spring
Pivot bolt
Shoulder
bolt
For Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com
Summary of Contents for Flurry 1400
