Snow Flurry 1400
20
NOTE:
With the switch box open, the internal func-
tions can be explained.
•
Depressing the starter button lifts the torsion
spring so that it can catch the switch lever.
•
Squeezing the safety bail rotates the bail
socket, which in turn causes the torsion spring
to push against the switch lever.
•
The switch lever pushes the safety key into the
switch plunger, closing the contacts.
6.
Service the internal components.
To remove/replace the switch:
A
Remove the switch lever and pin.
B
Lift the switch out of the housing.
C
Disconnect the wires.
D
Install by following the previous steps in reverse
order.
To remove/replace the circuit breaker:
A
Pull the circuit breaker out of the housing.
NOTE:
The circuit breaker is a tight fit in the hous-
ing.
B
Disconnect the wires.
C
Install by following the previous steps in reverse
order.
To remove/replace the harness:
A
Disconnect the wire that goes from the main harness to the switch.
B
Disconnect the wire on the circuit breaker closest to the main harness assembly.
C
Slide the main harness assembly out of the housing.
D
Install the main harness by following the previous steps in reverse order.
7.
Reassembly the switch box by following the previous steps in reverse order.
8.
Test run the snow thrower in a safe area before returning it to service.
Starter button
Torsion spring
Switch lever
Safety key
Bail socket
Figure 2.26
Switch
Circuit breaker
Switch lever pin
For Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com
Summary of Contents for Flurry 1400
