Snow Flurry 1400
26
Auger pulley
To remove/replace the auger pulley:
1.
Disconnect the power source.
2.
Remove the lower belt by following the procedures
described in the lower ribbed belt section of this
chapter.
3.
Block the auger by placing a piece of wood down
the discharge chute. See Figure 3.8.
4.
Remove the pulley nut using a 17mm wrench.
See Figure 3.9.
NOTE:
The pulley nut has right hand threads.
5.
Slide the pulley off of the auger.
Figure 3.8
Piece of wood
Figure 3.9
17mm wrench
For Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com
Summary of Contents for Flurry 1400
