TrojanLabel T3-OPX, User Manual

Page: 60 / 78

T3-OPX installation Page | 59
7.2.7 Cap Print Head
This function will cap the print head, by moving the service tray back in to idle position.
7.3 Media settings overview
The ”Media settings” menu point is the key for printing, and a profile must be actively set before print a
job. The media settings controls the print height and where the artwork is placed on the media relative to
the detected edge of the media.
The Media settings has a
profile control section
and
three tabs to manage the properties of the selected
profile
7.3.1 Profile control section
•
Save & Apply
Saves the properties to the current selected profile and applies the settings
• Create a new profile
Save properties to a new media profile. Type in the name of the new profle and press the small
save button.
Important: It only saves the profile, they are not applied, until the apply button is saved
Save & Apply
Create new profile
Select a profile Delete the selected profile