Trinnov Audio Altitude16, User Manual

Page: 56 / 156

Altitude
16
56
If your system is not in the list, you can either select a smaller system and add the missing speakers, or select a bigger
system and remove the extra ones.
IMPORTANT NOTE: it is critical to distinguish speakers from channels because one speaker may be used to
reproduce multiple channels, depending on the audio format which is being played. Therefore, your final speaker
configuration on the Altitude
16
must include the same number of amplification channels as in your audio system.
NOTE: The
Speaker/Room setup tool cannot display more speakers than the total number of available outputs in
your Altitude
16
configuration. Because of that, you are limited to 16 channels. Channel assignment for each format is
one of the next steps.
6.3.5 _ADDING REGULAR SPEAKERS
If required, the next step is to add speakers to achieve a configuration that fits perfectly
your system.
To add one or more speakers from the drop-down list:
• click on the Add Speaker button
• in the From Layout drop-down list, select the speaker template from which you want to add one or more speakers: all the
speakers available in the selected speaker layout are displayed in grey color;
• in the Speaker position drop-down list, select the specific speaker you want to add to complete your layout;
• click on the Add button next to the Speaker position drop-down list;
Repeat this process for each additional speaker you
want to add.
Figure 48: Selecting an initial speaker layout
To add one or more speakers from the 3D view :
• Click on the Add Speaker button;
• in the From Layout drop-down list, select the speaker template from which you want to add one or more speakers: all the
speakers available in the selected speaker layout are displayed in grey color;
• click on the speaker you want to add: it will be displayed in yellow color;
• click on the Add button next to the Speaker position drop-down list;
Repeat this process for each additional speaker you
want to add.