Trinnov Audio Altitude16, User Manual

Page: 146 / 156

Altitude
16
146
10.5.5 _CALIBRATION STATUS
The calibration status has 3 possible values:
• Yes : If no problem occurred during the measurement. After calibration, the Top Bar indicates NOT READY, which means
no sound can go through the processor until the optimization filters are computed.
• Partial : If the calibration was stopped in the middle of the measurement process.
• No! : When no measurement has been performed yet.
Figure 141: Calibration status
10.5.6 _CHECKING THE SPEAKER POSITIONS DURING/AFTER CALIBRATION
Please see chapter 6.11
10.5.7 _MULTI-POINT MEASUREMENTS (OPTIONAL)
Please see chapter 6.8.2
10.5.8 _COMPUTE THE OPTIMIZATION FILTERS
After the calibration is completed, the Top Bar indicates NOT READY, which means no
sound can go through the processor until the optimization filters are computed.