Trinnov Audio Altitude16, User Manual

Page: 116 / 156

Altitude
16
116
Save a new preset. This will allow you to compare the sound with and without the target curve.
Figure 116: Example of a Target Curve in the Advanced Settings user interface
NOTE: By default, the Optimizer will use both IIR and FIR filters to achieve the target curve.
7.4 _LIMITER CURVE
Unlike the Maximum Boost/Attenuation parameters, the limiter curve allows to setup
frequency-dependent maximum boosts and attenuations. This curve is not engaged by
default. To define a specific limiter curve, go to Optimizer Settings/Settings/Excursion
Curve :
• Use the Add point mode and your mouse to create editing points around the required frequency range.
• Use the Move point mode and your mouse to edit the limiter curve for the required frequency range.
Use the Delete point mode to delete editing points with your mouse.
IMPORTANT NOTE: Smooth transitions sounds prefered.
NOTE: Editing the maximum boost and maximum attenuation limiter curve disables the global Maximum Boost/
Attenuation settings in the Optimizer Main Settings page.