Trinnov Audio Altitude16, User Manual

Page: 147 / 156

User manual
147
To compute the optimization filters for your speaker measurements:
• Go to the Optimizer Settings/Calibration page;
Press the Compute button to start the calculation of the compensation filters. This will also create the Optimizer graphs
Figure 142: Computing The Optimization Filters
NOTE:
• The top bar will display a gear wheel icon and a graph icon during computation.
• An onscreen message notifies the end of the computation.
• The speaker icon indicates that the Optimizer is ready.
• Computation time varies depending on the number of speakers in the system and on the Optimizer parameters.
IMPORTANT NOTE:
• Once the speaker system has been calibrated, every change can be applied through recalculation of the filters by
pressing the Compute button.
• Performing new measurements is not required unless:
- Speakers/Furniture/listening positions change in the room;
- the active crossover filters are modified;
- The number of speakers is modified;
- The channel order is modified.
10.5.9 _SAVE THE PRESET
Last but not least, be sure to save the preset to make sure all your preferred
measurements and computed filters are not lost.