TriangleTube PRESTIGE Solo PA 110, Installation & Maintenance Manual

Page: 63 / 112

51
CHAPTER
9
CHAPTER 9 - ACVMAX OPERATION
9.12.1 Information Items
Information Item Description
Boiler Status
Displays the current operating state of the Prestige. This is the same as the status
line on the home screen.
Heating Call Displays if a central heating call is present.
DHW Call Displays if a domestic hot water call is present.
Boiler Firing Rate Displays the current firing rate of the Prestige.
Ionization Current Displays the current flame ionization current from the ignitor.
Boiler Setpoint Displays the current setpoint of the Prestige.
Supply Temp. Displays the current supply temperature of the Prestige.
Return Temp. Displays the current return temperature to the Prestige.
Boiler Flue Temp.
Displays the current flue temperature of the Prestige.
Outdoor Temp.
Displays the current outdoor temperature.
DHW Storage Temp.
Displays the current DHW storage temperature when Indirect Water Heater Sen-
sor PSRKIT22 is installed.
External Modulation Signal
Displays the current external modulation signal being received from an external
controller.
Pressure Displays the current system water pressure.
CH Ignitions
Displays the number of central heating ignitions since the unit was installed. This
counter increases in increments of twenty.
CH Runtime
Displays the number of hours the Prestige has run for a central heating call since
the unit was installed.
DHW Ignitions
Displays the number of domestic hot water ignitions since the unit was installed.
This counter increases in increments of twenty.
DHW Runtime
Displays the number of hours the Prestige has run for a domestic hot water call
since the unit was installed.
Mix Zone Temperature Displays the current low temperature mix zone temperature.