TriangleTube PRESTIGE Solo PA 110, Installation & Maintenance Manual

Page: 12 / 112

• It is prohibited to carry out any modifications to
the appliance without prior written consent from
Triangle Tube.
• Faulty parts must only be replaced by genuine
Triangle Tube factory parts.
• Failure to comply with these instructions can result
in minor property damage, or injury.
• The homeowner is only permitted to carry out the basic
set-up operations (EZ Setup) after he has received all
relevant instructions from the installer. Any other set-
up must be carried out by a qualified installer.
• In case of any anomaly, please call your qualified
service technician.
• Make sure to reference the unit’s model number and
serial number from the rating label when inquiring
about service or troubleshooting.
• Triangle Tube reserves the right to change the
technical characteristics, components and features of
its products without prior notice. Check for an updated
version of this manual at www.triangletube.com.
CAUTION
NOTICE
• Should overheating occur or if the gas supply fails
to shut off, turn OFF the manual gas control valve
external to the appliance.
• Do not add cold make up water when the
appliance is hot. Thermal shock can potentially
cause cracks in the heat exchanger.
• Failure to comply with these instructions can
result in substantial property damage, serious
injury, or death.
WARNING
PRODUCT EFFECTIVITY - PRESTIGE
SOLO 299/399
Following a configuration upgrade on the Pres-
tige Solo 299 and 399 blower/Venturi/gas valve
assembly, two different configurations now
exist in the Prestige Solo 299/399 boilers. To re-
flect the differences, a code (see table below) is
allocated to each configuration and displayed
in the relevant locations in the manual.
P Solo 299 P Solo 399
Effectivity code
Œ
- up to S/N
PA116182 PA116693

- from S/N
— (*) PA124663
(*) Unknown at the time of printing - therefore, for P299 boil-
ers, all S/N higher than effectivity code
Œ
are concerned.
NOTICE
xii
SAFE
TY
PRODUCT AND SAFETY INFORMATION