TPS Hardware Specification and Installation
29
Use the information in the following topics to manage the power cord retention bracket:
•
•
Attach the power cord retention bracket
•
Install the retention bracket
The following figure shows the back panel of a TPS 2200T device with the power cord retention bracket installed:
To install the retention bracket:
Procedure
1.
Orient the bracket against the back surface of the chassis.
2.
Slide the bracket over the two shoulder rivets on the back of the chassis.
The spring-loaded plunger in the center of the bracket slides into place.
Summary of Contents for TPS 2200T
Page 1: ......
