TPS Hardware Specification and Installation
15
4.
Link LED
In addition, the 2200T device comes equipped with eight 1G copper ports, eight 1G SFP ports, and four 10G SFP+ ports.
An external ZPHA device provides ZPHA bypass support for SFP/SFP+.
Model requirements
Refer to the following topics for specific requirements of the TippingPoint 2200T device.
•
•
Power requirements
The TPS 2200T device requires Alternating Current (AC) that meets the following requirements:
•
AC: Voltage 100 V to 240 V; 12 to 6 A; 47 to 63 Hz
The TPS 2200T device ships with two AC power supplies.
Cabling requirements
The TPS 2200T device ships with the following cables:
•
Two AC power cables, one for each hot-swappable power supply
•
Null modem cable (USB to RJ-45) for the serial console management port
Pluggable transceivers
Use any of the following SFP and SFP+ pluggable transceivers with the TPS 2200T device:
•
1G SFP RJ45 T (Copper SFP)
•
1G SFP LC LX 10km 1310nm XCVR
•
1G SFP LC SX 550m 850nm XCVR
•
10G SFP+ LC SR*
•
10G SFP+ LC LR*
*Rate does not include autonegotiation. Dual-rate SFP+ transceivers are not supported.
Note
Only optical transceiver modules (including SFP and SFP+) available from TippingPoint have been validated to achieve optimal
performance with TippingPoint products. Other vendor devices are not supported. Using other vendor devices could be detrimental
to proper operation of the TippingPoint system.
The following table details the information for SFP and SFP+ transceivers.
F
iber
I
nput
S
ignal
Left side
Transmit
Summary of Contents for TPS 2200T
Page 1: ......
