TPS Hardware Specification and Installation
20
Technical specifications
The TPS 440T device has the following specifications.
S
pecification
D
escription
Dimensions
(unpackaged)
1 U form factor – 1.73 in (H) x 16.78 in (W) x 17.72 in (D) (4.40 cm x 42.62 cm x
45.00 cm)
Weight
15.28 lbs (6.93 kg)
Power Requirements
AC: Voltage 100 to 240; Current 4 to 2 A; Frequency 50 to 60 Hz
The device’s maximum power consumption is 250 W.
Service Provider
operating
requirements
Temperature: 32 to 104° F (0 to 40° C) — Operating
Temperature: -4 to 158° F (-20 to 70° C) — Storage
Altitude: No degradation up to 10,000 feet (3048 m)
Humidity: 5% to 95% (non-condensing)
External interfaces
•
One 1 GbE copper management port
•
One RJ-45 console port
•
Eight 1 GbE copper ports
•
One CFast slot
Install your TPS device
After you have completed preparation procedures and unpacked the TPS device, you can install and configure the
components. Have the
TPS CLI Reference
available for configuration information reference. After installation of the hardware
components, complete the initial setup wizard as part of the installation and configuration procedures.
Before installing your device, review and adhere to all safety guidelines described the
TippingPoint Hardware Safety and
Compliance Guide
, which also contains detailed regulatory compliance information and is included with your product shipment.
Follow these installation procedures:
•
•
•
•
Install the chassis
Before installing your new security device, gather any necessary materials and prepare the network and hardware site. To
carefully and correctly install the device, read through all preparation instructions and requirements. Use this general guideline
information for all TippingPoint devices. For installation guidelines specific to your TPS device, refer to the appropriate
Install
your security device
quick start for your model.
To install the device you must complete the following procedures:
•
Summary of Contents for TPS 2200T
Page 1: ......
