TPS Hardware Specification and Installation
7
•
Solid red: The device is in Intrinsic High Availability (Intrinsic HA) Layer-2 Fallback (L2FB) mode.
•
Off: The device is not in L2FB mode.
•
System health status
•
Flashing green: The system is booting up, and is not yet ready to inspect traffic.
•
Solid green: The system is healthy.
•
Red: The system is experiencing a health alert, such as a fan failure. This state resets to solid green when you view
the system log.
•
Management port status
•
Link LED: Solid green indicates that the port is linked and ready for data.
•
Activity LED: Flashing amber indicates that the port is passing data.
Model requirements
Refer to the following topics for specific requirements of the TPS TX Series devices.
•
•
Power requirements
The 8200TX and 8400TX devices require Alternating Current (AC) or Direct Current (DC) that meets the following
requirements:
•
AC: Voltage 100V to 240V; 12 to 6A; 47 to 63 Hz
•
DC: Voltage -40V to -60V; 24 to 16A
The TX Series devices ship with two AC power supplies. Consult your TippingPoint account contact for more information if
you require a DC power supply.
Cabling requirements
The TPS 8200TX and 8400TX devices ship with the following cables:
•
Two AC power cables, one for each hot-swappable power supply
•
Null modem cable (USB to RJ-45) for the serial console management port
I/O module installation
Use the following topics to set up the I/O modules supported in TippingPoint security devices:
•
•
•
Summary of Contents for TPS 2200T
Page 1: ......
