TPS Hardware Specification and Installation
14
•
Solid Green
— Device is running in a healthy state.
•
Solid Yellow
— Device is running but has a health rating below the acceptable threshold.
Alert indicator
Refer to the Alert indicator on the right side of the front panel to learn whether the device is in L2FB mode or not.
•
Solid Yellow
— Device is in L2FB (including when rebooting).
•
Off
— Device is not in L2FB.
Fans and power supplies
The 2200T device includes two hot-swappable power supplies.
about these power supplies.
The 2200T device includes three cooling fans. The fans for the 2200T device are redundant but
not
hot-swappable. If a failure
to a fan module occurs, you must replace the entire device.
about fans.
External storage card
The TPS 2200T device includes a CFast card slot. The external storage card is used to store traffic logs, snapshots, and other
system data. You can remove and insert the card while the device is running; however, to do so, you must issue the
appropriate unmounting, mounting, and preparation commands from the device CLI.
For more information, see
TPS CLI Reference
for command syntax.
Ports
The TPS 2200T device provides a console and management port as shown in the following figure.
1.
1 RJ-45 serial console port
2.
1 GbE copper management port
3.
Activity LED
Summary of Contents for TPS 2200T
Page 1: ......
