TPS Hardware Specification and Installation
11
When the device is turned off,
cold swapping
allows you to add, remove, or replace an I/O module as you would when you hot
swap. However, when you cold swap an I/O module, if the replacement module type is the same, the module port
configuration is preserved.
When the device is managed by the SMS, a delay of up to 1 minute can occur before the SMS recognizes the changed I/O
module.
When you insert a bypass I/O module, the bypass I/O module always starts up in bypass mode. A bypass I/O module
remains in bypass mode until you remove it from bypass mode through the CLI, LSM, or SMS. Rebooting the TPS does not
change the bypass mode of the bypass I/O module. For information about how to use normal mode instead of bypass mode,
refer to the SMS, LSM, or CLI documentation.
Supported transceivers and cables for TippingPoint I/O modules
For a list of supported transceivers and cables for TippingPoint I/O modules, refer to
I/O Modules Overview
.
Technical specifications
The TPS TX Series devices have the following specifications.
S
pecification
D
escription
Dimensions
(unpackaged)
•
8200TX device (1 U form factor) – 1.73 in x 18.54 in x 24.84 in (44 mm x
428 mm x 631 mm)
•
8400TX device (2 U form factor) – 3.46in x 18.54 in x 24.84 in (88 mm x
428 mm x 631 mm
Weight
•
8200TX device – 32 lbs (14.5 kg)
•
8400TX device – 50 lbs (22.7 kg)
Power
Requirements
•
AC: Voltage 100 to 240; Current 12 to 6 A; Frequency 47 to 63 Hz
•
DC: Voltage -40 to -60, Current 24 to 16 A, SELV
The device’s maximum power consumption is 750 W.
Service Provider
operating
requirements
Temperature: 32 to 104° F (0 to 40° C) — Operating
Temperature: -4 to 158° F (-20 to 70° C) — Storage
Altitude: No degradation up to 10,000 feet (3048 m)
Humidity: 5% to 95% (non-condensing)
External interfaces
•
One 1 GbE copper management port
•
One RJ-45 console port
•
Two fixed QSFP+ special purpose (SP) ports
•
Network slots:
•
8200TX device – 2 slots
•
8400TX device – 4 slots
•
1 SSD slot
Summary of Contents for TPS 2200T
Page 1: ......
