16
System Operating Status
STATUS Menu
The STATUS menu is used to view various operating condi-
tions such as temperatures and humidity levels. It’s used to
view unit component status such as fan, compressor,
heater, and economizer operation, as well as setpoint sta-
tus.
The screens shown in this section are for example only.
Pressing the + (Plus) key while viewing any of the status
display screens will add that screen to the Custom menu.
When a status screen is displayed for 30 minutes without a
key being pressed, the LCD screen will revert to the general
operating status display. If this happens, press the STATUS
key again to return to the status menu. The following are
examples of status screens that may be viewed by pressing
the STATUS key.
Press the STATUS key to enter into the status menu. The
"STATUS MODE" will automatically return to the power up screen
after 30 minutes, if no keys are pressed.
Used on Units:
All Units
Possible Values:
See "General Status" Display Description
1. Press the NEXT key to scroll forward through the status screens.
2. Press the PREVIOUS key to scroll backwards to view previously
displayed status screens.
3. Press the + (Plus) key while viewing any status screen to add
that screen to the custom menu. Refer to the custom menu for
the creation and maintenance of customized menus.
Used on Units:
All Units
Possible Values:
Active Solution Setpoint = 0 - 99 F
Entering = 0 - 99.9 F
OR
Leaving = 0 - 99.9 F
This screen is displayed when the unit is in Ice Building.
Used on Units:
All Units
Possible Values:
Active Ice Build Terminate STP = 0 - 99 F
Entering = 0 - 99.9 F
Leaving = 0 - 99.9 F
Note:
The range for all temperature inputs
are 0 to 99.9 F. "ERR" will appear if the
temperature is out of range.
Used on Units:
All Units
1. Press the ENTER key to advance to the following screen.
2. Press the NEXT key to bypass this menu and advance to
"General Status Submenu"
Cool 0 Solution Pump Off
Standby Diagnostics
Active Leaving Solution Setpoint 55.0 F
Temp: Entering 55.0 F Leaving 50.0 F
Compressor Status Submenu
Press ENTER to View Data in This Submenu
Active Ice Build Terminate STP 55.0 F
Temp: Entering 55.0 F Leaving 50.0 F
Summary of Contents for IntelliPak CGAF Series
Page 68: ...68...
