(vapor, liquid, and/or solid), all hazard precautions given in the data sheet must be
observed. Warning. Sudden release of hot organic chemical vapors or mists from process
equipment operating at elevated temperature and pressure, or sudden ingress of air into
vacuum equipment, may result in ignitions without the presence of obvious ignition
sources.
Other Precautions:
Ethylene glycol's vapor pressure is such that at room temperature
toxic concentrations are unlikely to occur. Poisoning resulting from vapor usually occurs
only if ethylene glycol is heated; therefore, occupational exposure is rare.
Spills on hot fibrous insulations may lead to lowering of the autoignition temperatures
possibly resulting in spontaneous combustion.
Section VIII - Exposure Controls/Personal Protection
Respiratory Protection:
Atmospheric levels should be maintained below the exposure
guideline. When respiratory protection is required for certain operations, use an
MSHA/NIOSH-approved air-purifying respirator.
Ventilation:
Good general ventilation should be sufficient for most conditions. Local
exhaust ventilation may be necessary for some operations.
Protective Clothing:
Use impervious gloves when prolonged or frequent contact could
occur. Use safety glasses. If vapor exposure causes eye irritation, use a full-face
respirator.
Other Protective Clothing or Equipment:
An eye wash and safety shower should be in
close proximity.
Work/Hygienic Practices:
All employees who handle this product should wash their
hands before eating, drinking, smoking, or using toilet facilities.
Section IX - Physical and Chemical Properties
Physical State:
Liquid
pH:
9
Melting Point/Range:
N/A
Boiling Point/Range:
197°C (387°F)
Appearance/Color/Odor:
Colorless, mild sweet odor.
Solubility in Water:
100%
Vapor Pressure (mmHg):
0.060 @ 68°F
Specific Gravity (Water=1):
1.115
Molecular Weight:
62 g/mol
Vapor Density (Air=1):
2.1
% Volatiles:
N/A
How to detect this compound :
N/A
Freezing Point:
-13°C; (9.0°F)
Bulk Density:
1.240 lbs./ft.³
Liquid Density:
9.280 lbs/gal @ 68°F, 1.114 kg/l @
20°C
Section X - Stability and Reactivity
Stability:
Stable
Hazardous Polymerization:
Will Not Occur
Conditions to Avoid:
Exposure to elevated temperatures can cause product to
decompose. Generation of gas during decomposition can cause pressure in closed
systems.
Materials to Avoid:
Avoid unintended contact with acids, bases, and oxidizing
Product Name: Ethylene Glycol
4 of 7
Summary of Contents for AM4A0A18S11SA Series
