NVR User
’
s Manual
44
Click on <OK> from the virtual keyboard to apply the setting.
To delete a recording template, select a recording template and then click
on < >. The selected recording template will be removed from the
template list.
Setup a Recording Template
Follow the steps below to setup a recording template.
Select a recording template from the template list.
Click on a desired recording type, <Continuous
>
or <No Record>.
Click at any grid of time to assign the selected recording type.
Click on any hour on the top to fill up the column.
Click on any day on the left to fill up the roll.
Click on the top left grid to always record with the selected recording type.
Click and drag the mouse to fill up and assign the selected recording type.
Assign Recording Template to the Connected IP cameras
Users can assign a preset recording template to each connected site. After
templates are set, select a desired recording template from the drop-down list.
The NVR will record each site according to the applied template.
NOTE:
If the applied recording template is removed from the template
list, the system will automatically apply the default template to the site.
6.2
Record Setup
In Record Setup menu, users can setup whether to enable the circular
recording of the NVR and whether to record the pre-alarm / post-alarm video
as a part of event videos when an alarm or event occurs.
Circular Recording
The Circular Recording function is to adjust the HDD space usage of the NVR
and to store new video data while overwriting the oldest recorded video.
Follow the instruction below for circular recording setup.
Check the box to enable circular recording and select <Size> or
<Percentage> to set as the unit of the reserved HDD partition.
Then, set a threshold value (5% or 5120MB) in the entry field. The NVR
will reserve the certain partition of the HDD, and when the used space of
the HDD reaches the threshold, the NVR will start overwriting the oldest
recorded data.