NVR User
’
s Manual
18
Detection Area Setup
Under motion setup mode, a red frame (detection window) will be displayed
on the channel grid. Note that the amount of motion detection areas may vary
from different IP camera models. Refer to the following to setup motion
detection windows.
To change the location of the motion detection window, click on the center
of the detection window and move it to the desired location.
To resize the detection window, click and drag the edge of the red frame.
To add a new detection window, right click on the channel grid and select
<Add New Window> from the drop-down list.
Click on <Apply> to save the setting to the selected IP camera channel.
Then follow the description above to setup the added detection window.
To remove a motion detection window, first select a desired detection
window, and then right click on the channel grid.
Then, select <Remove Selected Window> from the drop-down list. The
selected detection window will be removed. Alternatively, users can
remove all detection windows by selecting <Remove All Window> from
the drop-down list.
Click on <Apply> to save the setting to the selected IP camera channel.
3.1.10 Camera Information
Users can check the brief information of the connected IP cameras. Click on
any IP camera channel from the display window or from View Management
pane, and the basic information of the IP camera will be listed in Camera
Information pane. The brief information includes site name, IP address,
device type, video format, etc.
