NVR User
’
s Manual
24
Daylight Saving Time Setup
This is for people who live in certain regions to observe Daylight Saving Time.
Check or un-check the
“
Enable DST
”
box to enable or disable this function. If
the function is disabled, the DST Start/End time will be grayed out and cannot
be accessed.
DST Start & End
These items are used to program the daylight saving duration. Click on
the Month / Week / Weekday drop-down list to change the value.
After setting, click on <Apply> to save and apply the setting.
4.2.2
Event Setup
Users can set the event settings for each selected IP camera. Access the
Event setting menu via <Setup> <System> <Event>. The setting menu
displays as follows.
Buzzer
Check the
“
Enable Buzzer
”
box, and the NVR will start beeping when motion
is detected or an alarm is triggered.
Key Beep
Check the
“
Enable key beeps
”
box, and when users press any control key on
the remote control, the NVR will beep.
