NVR User
’
s Manual
20
4.2
General Setup
Select <General> to enter the basic NVR setting menu.
Factory Default
This item is used to load the factory default setting of the NVR. Click on
<Set> and a warning message window will show up, click on <Yes> to
proceed and the NVR will reboot after loading the default setting. Otherwise,
click on <No> to abort the factory default procedure.
Export Configuration
This item allows users to save and export the current NVR configuration to an
external drive, such as a USB Flash Drive.
Before exporting the configuration file, ensure that an external drive is
connected to the NVR. Then, click on <Export> and an Export window will be
displayed. Click on <Confirm> to start the exportation, or click on <Cancel> to
abort.
NOTE:
It is recommended to export configuration before upgrading
the NVR system. In addition, to backup the configuration routinely is
recommended, in case for unexpected conditions.
Import Configuration
This item is used to load an NVR configuration file that was previously stored
in an external drive.
Connect the external drive that stores the configuration file to the NVR. Click
on <Import> and a warning message will show up, notifying users that the
