TP-Link C50V5 User Manual Download Page 90

Page: 90 / 117

Chapter 5

&RQƮJXUHWKH5RXWHULQ$FFHVV3RLQW0RGH

•

Enable Client Isolation

- This function isolates all connected wireless stations so

that wireless stations cannot access each other through WLAN. This function will be
disabled if WDS/Bridge is enabled.

•

Enable WMM

- WMM function can guarantee the packets with high-priority messages

being transmitted preferentially. It is strongly recommended to enable this function.

5. 6. 7.

Wireless Statistics

1. Visit

http://tplinkwifi.net

, and log in with the username and password you set for the

router.

2. Go to

Wireless

Wireless Statistics

to check the data packets sent and received by

each client device connected to the router.

•

MAC Address

- The MAC address of the connected wireless client.

•

Current Status

- The running status of the connected wireless client.

•

Received Packets

- Packets received by the wireless client.

•

Sent Packets

- Packets sent by the wireless client.

•

SSID

- SSID that the station associates with.

5. 6. 8.

Throughput Monitor

1. Visit

http://tplinkwifi.net

, and log in with the username and password you set for the

router.

2. Go to

Wireless

Throughput Monitor

to watch wireless throughput info.

Summary of Contents for C50V5






















































































































Search results

Summary of Contents for C50V5

Reviews:

Related manuals for C50V5

Brands by name

Popular brands

TP-Link C50V5, User Manual

Search results

Summary of Contents for C50V5

Reviews:

Related manuals for C50V5

Brands by name

Popular brands