TP-Link C50V5 User Manual Download Page 75

Page: 75 / 117

Chapter 4

&RQƮJXUHWKH5RXWHULQ:LUHOHVV5RXWHU0RGH

•

Log Type

- By selecting the log type, only logs of this type will be shown.

•

Log Level

- By selecting the log level, only logs of this level will be shown.

•

Refresh

- Refresh the page to show the latest log list.

•

Clear Log

- All the logs will be deleted from the router permanently, not just from the

page.

4. 18. 11. Statistics

1. Visit

http://tplinkwifi.net

, and log in with the username and password you set for the

router.

2. Go to

System Tools

Statistics

3. Enable

Traffic Statistics

and click

Save

to get the network traffic of each PC on the

LAN.

IP/MAC Address

The IP and MAC address are displayed with related statistics.

Total

Packets

The total number of packets received and transmitted by the
router.

Bytes

The total number of bytes received and transmitted by the
router.

Summary of Contents for C50V5






















































































































Search results

Summary of Contents for C50V5

Reviews:

Related manuals for C50V5

Brands by name

Popular brands

TP-Link C50V5, User Manual

Search results

Summary of Contents for C50V5

Reviews:

Related manuals for C50V5

Brands by name

Popular brands