TP-Link AC50 Configuration Manual Download

Page: 56 / 112

Authenticaiton Server

Type

Specify the server type of the Web authentication. Here we select Remote

Authentication Server.

To configure Radius server, refer to

Authentication Server

Authentication Server

Group

Select the server group of the Web authentication.

Free Authentication

Timeout

Set the free online duration for the users.

Note: If the remote authentication server is configured with an online time

duration for the users, then the time duration set on the server will take effect

instead of Free Authentication Timeout set here.

Success Redirect URL

Specify the redirect URL address after successful authentication.

Fail redirect URL

Specify the redirect URL address after the authentication failed.

Non-sense

Authentication

If non-sense authentication is enabled, the non-sense authenticated users will

pass the authentication automatically when connecting to the wireless network.

Specify whether to enable the Advertisement feature. With this feature enabled,

you can add advertisement pictures on the authentication page. These

advertisement pictures will be displayed before the login page appears. The

required parameters are as follows:

Picture Resouce:

You can add up to 5 advertisement pictures. When several

pictures are added, they will be played in a loop. There are two picture

resources: Local Upload and External Link.

Advertisement Duriation Time:

Specify how long the advertisement will be

displayed for. For this duration, the pictures will be played in a loop. Enter

a value from 1 to 30 seconds. If the duration time is not enough for all the

pictures, the rest will not be displayed.

Photo Carousel Interval:

Specify the picture carousel interval. If this value

is set as 5 seconds, the first picture will be displayed for 5 seconds, followed

by the second picture for 5 seconds, and so on. Enter a value from 1 to 10

seconds.

Allow to Skip Advertisement:

Specify whether to enable this feature. With this

feature enabled, the user can click the Skip button to skip the advertisement.

Description

Specify a description for the Web authentication entry to make it easier to

search for and manage.

Summary of Contents for AC50

















































































































Search results

Summary of Contents for AC50

Reviews:

Related manuals for AC50

Brands by name

Popular brands

TP-Link AC50, Configuration Manual

Search results

Summary of Contents for AC50

Reviews:

Related manuals for AC50

Brands by name

Popular brands