TP-Link AC50 Configuration Manual Download

Page: 39 / 112

802.11a

Basic Rate

: Specify the basic rate set with which the 802.11a clients are

allowed to access the network. At least one rate should be selected from the

rate set. 6Mbps, 12Mbps and 24Mbps are selected by default.

Supported Rate

: Specify the supported rate for 802.11a clients. The supported

rate set should not overlap with the basic rate set. 9Mbps 18Mbps, 36Mbps

48Mbps and 54Mbps are selected by default.

Multicast Rate

: Specify the multicast rate for the 802.11a multicast packets.

The rate should be selected from the basic rate set. When auto is selected, the

system will select a suitable rate from the basic rate set automatically.

802.11b

Basic Rate

: Specify the basic rate with which 802.11b clients are allowed to

access the wireless network. At least one rate should be selected in the rate

set. 1Mbps and 2Mbps are selected by default.

Supported Rate

: Specify the supported rate for 802.11b clients. The supported

rate should not overlap with the basic rate that has been set. 5.5Mbps and

11Mbps are selected by default.

Multicast Rate

: Specify the multicast rate for the 802.11b multicast packets.

The rate should be selected from the basic rate set. When auto is selected, the

system will select a suitable rate from the basic rate set automatically.

802.11g

Basic Rate

: Specify the basic rate with which the 802.11g clients are allowed to

access the network. At least one rate should be selected in the rate set. 1Mbps,

2Mbps, 5.5 Mbps and 11Mbps are selected by default.

Supported Rate

: Specify the supported rate for 802.11g clients. The supported

rate set should not overlap with the basic rate set. 6Mpbs, 9Mbps, 12Mbps,

18Mbps, 24Mbps, 36Mbps, 48Mbps and 54Mbps are selected by default.

Multicast Rate

Specify the multicast rate for the 802.11g multicast packets.

The rate should be selected from the basic rate set. When auto is selected, the

system will select a suitable rate from the basic rate set automatically.

802.11n

Basic MCS Index

: Specify the basic MCS index for 802.11n clinet. The

maximum MCS index value for 802.11n clients should be equal to or greater

than the basic MCS index value. Otherwise, the clients cannot be allowed to

access the wireless network. The default setting is blank. If a value is selected ,

only 802.11n clients are allowed to access the network.

Supported MCS Index

: Specify the support MCS index for the device. The

support MCS index should be equal to or greater than the basic MCS index.

802.11ac

Basic MCS Set:

Specify the basic MCS set for the device. The 802.11ac clients

should support the number of antennas and MCS index range regulated by the

basic MCS set. Otherwise, the clients cannot access the wireless network.

Supported MCS Set

: Specify the support MCS set for the device. The

corresponding number of antennas and MCS index range of the support MCS

set should be equal to or greater than that of basic MCS set.

Note:

For the connected APs enabled with radio, the rate settings won’t take effect until the APs

reboot or their radios are disabled and enabled again.

Summary of Contents for AC50

















































































































Search results

Summary of Contents for AC50

Reviews:

Related manuals for AC50

Brands by name

Popular brands

TP-Link AC50, Configuration Manual

Search results

Summary of Contents for AC50

Reviews:

Related manuals for AC50

Brands by name

Popular brands