TP-Link AC50 Configuration Manual Download

Page: 106 / 112

102

9.2.4 Firmware Upgrade

Choose the menu

System Tools > Administration > Firmware Upgrade

to load the

following page.

Figure 9-7

Reboot

Here you can upgrade your firmware. Please back up your configurations before upgrading.
Click

Browse

to locate the firmware file, then click

Upgrade

to upgrade your firmware.

For the latest firmware version, please go to

www.tp-link.com

Firmware Version

Displays the current firmware version.

Hardware Version

Displays the current hardware version.

Note:

• DO NOT power off your device or refresh the page during the upgrade. The device will reboot after the

upgrade is complete.

•

The configurations may be lost after upgrading. Please back up your configurations before upgrading.

9.3 Traffic Statistics

Choose the menu

System Tools > Traffic Statistics > Interface Statistics

to load the

following page.

Figure 9-8

Interface Statice

Here you can view the traffic statistics of the interfaces and click the header to display the

data in ascending or descending order.

Interface

Displays the current enabled interface of the device.

TX Rate (Kb/s)

Displays the rate data frames are transmitted.

Summary of Contents for AC50

















































































































Search results

Summary of Contents for AC50

Reviews:

Related manuals for AC50

Brands by name

Popular brands

TP-Link AC50, Configuration Manual

Search results

Summary of Contents for AC50

Reviews:

Related manuals for AC50

Brands by name

Popular brands